Gamepad companion hatswitch manual#
Gamepad companion hatswitch full#
Gamepad companion hatswitch software#

Please download the latest Companion beta + our latest companion v2.3 pages for full Companion Compatibility : – Preset transition speed now shows in seconds – Improved communication protocol for Companion (requires latest Companion RC1 at least) – Now shows WB / Tint / ISO / Iris / Shutter values in Middle Control when connected to the ATEM – General Improvement & Stability updates. – Companion : Fixed Rec Start Stop for all cameras not working – Middle Remote : the Glue solution Middle-Control-1 has been updated and now features a dedicated Focus action for EF lenses. – Added Tally Brightness slider in the Advanced Settings page – Added Support for the APC-R Gimbal adapter – Added control for custom Preset Transition Speed in Companion and on the Middle Remote.

Gamepad companion hatswitch software#

– Settings -> Advanced config : added the option to enable Zoom control from ATEM Software / ATEM Advanced Panel 1M/E

– Settings -> Advanced config : added the option to specify cameras with an EF lens – Improved focus support for EF Mount lenses – Pan Tilt Speed / Zoom Speed / Preset transition speed / Cam ID now saved when restarting the app – Preset Transition Speed slider now also affects the Zoom / Focus / White Balance / Tint & Iris, which will result in smoother performance This example code is in the public domain.Middle Control Software 2.5.0 ( latest) : Potentiometers should be connected to analog inputs 0 to 1. Wire each button between the digital pin and ground. * Basic USB Joystick Example Teensy becomes a USB joystick You must select Joystick from the 'Tools > USB Type' menu Pushbuttons should be connected to digital pins 0 and 1.

Gamepad companion hatswitch manual#

You can turn manual mode on and off,Īs needed, or just leave manual mode active and always use send_now().Įxample Program File > Examples > Teensy > USB_Joystick > Basic. Press to occur exactly as you change the X and Y asix to a specific position, If you want 2 buttons to be pressed at exactly the same instant, or a button When manual send mode is active, Joystick's USB packets are only transmitted Over when the USB packets are transmitted, you can enable manual send mode. With the new Joystick position and buttons state. Normally each function you use causes a USB packet to be sent to your computer, The properties page shows all of your joystick's controls, which updateĪs you move or press buttons. The simplest test is the Windows Game Controllers Control Panel. To just connect a button from the pin to ground. The buttons has the input pullup pin mode, so it's ok The testĮxpects six voltages on analog inputs 0 to 5, and buttons on 0 to 15 (for Teensy) Use -1 to return the hat to center resting position. The hat switch can be moved in 45 degree increments. Y(value) // 512 is resting position Joystick. X(value) // 'value' is from 0 to 1023 Joystick.

Each takes a number from 0 toġ023, where 512 is the center or resting position. There are six functions to control the Joystick's 6 axes. button(num, 0) // Release button 'num' (1 to 32) button(num, 1) // Press button 'num' (1 to 32) Joystick. To send button actions, just use Joystick.button, with the button number to change (1 to 32), and either pressed (1) or not pressed (0). 6: Axis (X, Y, Z, Rotate Z, Left Slider, Right Slider).When you select a Joystick type from the Tools > USB Type menu, the Teensyīecomes a USB joystick (or gamepad) which supports these features: Using USB Joystick Typical Joystick Layout